Digital First Dentistry › Dentsply Sirona Primescan intraoral scanners

Scanners

Dentsply Sirona Primescan intraoral scanners

Primescan scanners are made by Dentsply Sirona, which also makes CEREC chairside systems. This page sets out the current range and what to check. It is independent: no manufacturer pays for it, and Digital First Dentistry does not rank or recommend one scanner over another. Our independence policy.

Current models

  • Primescan 2 (launched September 2024): wireless and cloud-native, scanning on any internet-connected device through the DS Core cloud platform. A paid DS Core subscription is required.
  • Primescan Connect: wired, used with a dedicated Primescan PC.
  • The original Primescan and earlier CEREC Omnicam remain in many practices.

The patient-first view

Judge a scanner first on what it does for the patient: can they see their own mouth, compare it over time and own the result? From each manufacturer's published material; no ranking. See the patient-first scanner scorecard.

  • Educate (see it): The DS Core Communication Canvas puts full-colour 3D scans, 2D and 3D X-rays together in one view for the patient, and DS Core includes a SureSmile aligner simulator.
  • Engage (compare over time): The Communication Canvas lets the dentist arrange records side by side. A dedicated overlay-and-colour-map comparison tool was not found in the material we reviewed.
  • Empower (the patient owns it): Dentists can share 2D images and intraoral scans with patients directly from the Communication Canvas (DS Core subscribers).

Points to check

  • Cloud storage: Primescan 2 scans are processed and stored on DS Core. Ask about data location, retention and export.
  • Availability: early in its launch Primescan 2 was offered in some countries only; check your market.

Questions to ask before you buy any scanner

  1. Which file types can I export (for example STL, PLY or OBJ), and is export included or charged?
  2. Is there an ongoing software, cloud or service subscription, and what stops working if I do not pay it?
  3. Which laboratories and design software accept scans from this system directly?
  4. What training is included, and who supports the team in the first 90 days?
  5. How are tips and sleeves cleaned or replaced, and what do they cost per patient?
  6. Can I compare scans over time for monitoring, and is that included?

The scanner matters less than whether the team uses it at every appropriate check-up. See making the scan part of every check-up and the free CPD module routine intraoral scanning.

Other scanners

Compare the families side by side on the intraoral scanners hub, or read how to choose a scanner.

Facts checked on 15 November 2026 from manufacturer and trade-press sources. Models, software and availability vary by country and change often; confirm with the manufacturer or your dealer.

Common questions

What is Primescan 2?

A wireless, cloud-native intraoral scanner from Dentsply Sirona, launched in September 2024, that scans through the DS Core cloud platform on any internet-connected device.

Does Primescan 2 need a subscription?

Yes. A paid DS Core subscription is required to operate it.

Get the white paper and the starter guide

Free. Enter your email and both open straight away.

We use your email to send these resources, and updates only if you tick the box. Never shared unless you ask for introductions. Unsubscribe any time.

Written by Dr Bhavin Bhatt BDS MFGDP RCS (Eng), GDC 76358 with AI drafting assistance · Facts checked 16 November 2026 · Editorial policy · Independence · Report an error