Digital First Dentistry › Digital dentistry glossary
Glossary
Digital dentistry glossary
Plain-English definitions of 518 terms in digital dentistry, from intraoral scanning and 3D printing to implants, aligners and practice adoption. Written by a practising dentist, independent of any manufacturer.
Diagnosis and monitoring · Scanning and imaging · Design and restorations · 3D printing · Implants · Aligners and tooth movement · Practice and adoption
Diagnosis and monitoring
- Abfraction
- A wedge-shaped loss of tooth structure near the gumline, thought to be linked to tooth flexing under load, though the cause is debated.
- Abfraction lesion
- A wedge-shaped defect at the gum line, possibly linked to tooth flexing.
- Abrasion
- Loss of tooth surface caused by something other than tooth-to-tooth contact, most often hard toothbrushing or abrasive toothpaste, typically near the gumline.
- Active monitoring
- Deliberately recording and reviewing a finding over time rather than treating it immediately.
- Apex locator
- An electronic device that estimates root canal length.
- Apicectomy
- Surgically removing the tip of a root and sealing it.
- Arrested caries
- A carious lesion that is no longer progressing, often hard, shiny and darker in colour.
- Attrition
- Tooth wear caused by tooth-to-tooth contact, often linked to grinding or clenching.
- Baseline scan
- The first scan in a patient's record, against which later scans are compared.
- Basic Erosive Wear Examination (BEWE)
- A widely used scoring system that grades erosive tooth wear in each sextant of the mouth from 0 (none) to 3 (severe), giving a total score.
- Basic Periodontal Examination (BPE)
- A screening examination of the gums in six sections of the mouth, scored 0 to 4 with an asterisk for furcation involvement.
- Bitewing radiograph
- An intraoral X-ray showing the crowns of upper and lower back teeth together, used mainly to detect caries between teeth and assess bone levels.
- Black triangle
- A gap between teeth near the gum where the papilla is missing.
- Bleeding on probing
- Bleeding from the gum when a probe is gently placed into the pocket, a sign of inflammation.
- Bruxism
- Habitual grinding or clenching of the teeth, awake or during sleep.
- Calculus
- Hardened plaque on teeth, also called tartar.
- Caries risk assessment
- A structured judgement of how likely a patient is to develop new decay, based on factors such as past decay, diet, fluoride use, saliva and plaque control.
- Chlorhexidine
- An antiseptic used in mouthwashes and gels.
- Clinical attachment loss
- The loss of periodontal support measured from a fixed point, usually the cementoenamel junction.
- Co-diagnosis
- The patient understands a finding well enough to own it and say, in their own words, what it means for them. The clinician still makes and records the diagnosis.
- Co-discovery
- Clinician and patient noticing a change together, usually by comparing the patient's own scans or photos from different visits.
- Consequences of no treatment
- A plain explanation of what is likely to happen if a finding is left alone, given alongside the treatment options.
- Cracked tooth
- A tooth with an incomplete fracture, which may cause pain on biting and can progress over time.
- Cracked tooth syndrome
- Pain from an incomplete crack, often sharp on biting or release.
- Craze line
- A shallow, usually harmless crack confined to the enamel, common on front teeth in adults.
- Cusp fracture
- Breakage of one of the raised points (cusps) on a back tooth, often next to a large filling.
- Delivering Better Oral Health
- An evidence-based toolkit from the UK health departments on prevention in dental practice.
- Dental caries
- A disease in which acids made by plaque bacteria from sugars dissolve tooth structure over time.
- Dental erosion
- Loss of tooth surface by acids not produced by bacteria, from diet or reflux.
- Dental operating microscope
- A microscope used to magnify the treatment area.
- Dental wellness scan
- A term some companies use for an intraoral scan taken as a general record of oral health, rather than for making a specific restoration.
- Dentine caries
- Caries that has progressed through the enamel into the dentine beneath.
- Dentine hypersensitivity
- Short, sharp pain from exposed dentine in response to cold, touch or sweet stimuli.
- Diet advice
- Advice on sugar frequency and timing to reduce caries risk.
- Difference map
- A colour-coded view showing where two aligned scans differ, and by roughly how much.
- Digital check-up
- A check-up in which an intraoral scan, and sometimes other digital tools, are used alongside the clinical examination to record and show the patient's oral health.
- Digital second
- Using the intraoral scanner mainly after treatment has been decided, to make crowns, aligners or implant restorations.
- Digital-first dentistry
- A way of practising in which the intraoral scan is taken at the routine check-up, before treatment is decided, so change is recorded between visits and care is planned early.
- Disclosing tablet
- A dye that stains plaque so it can be seen.
- Enamel lesion
- An area of early mineral loss confined to the enamel, often seen as a white or brown spot.
- Erosion
- Loss of tooth structure from acids not produced by bacteria, such as dietary or gastric acid.
- Erythroplakia
- A red patch in the mouth that cannot be attributed to another condition. It carries a significant risk of being or becoming cancerous.
- Field of view (FOV)
- The size of the volume a cone beam CT scan captures, from a few teeth (small) to one or both jaws (medium) or the whole face (large).
- Fissure sealant
- A resin or glass ionomer coating applied to the grooves of back teeth to help prevent caries.
- Fluoride varnish
- A concentrated fluoride coating painted on teeth to help prevent and arrest caries.
- Fracture line
- A visible line on a tooth or restoration showing where a crack runs through enamel, dentine or filling material.
- Fremitus
- Vibration of a tooth felt when the patient bites together, suggesting it is taking excess load.
- Furcation involvement
- Loss of bone between the roots of a multi-rooted tooth.
- Gingival biotype
- The thickness and character of a patient's gum tissue.
- Gingival recession
- Movement of the gum margin away from the crown of the tooth, exposing the root surface.
- Gingivitis
- Inflammation of the gums without loss of supporting bone, usually caused by plaque.
- Gum contour
- The shape and position of the gum margin around each tooth.
- High-fluoride toothpaste
- Toothpaste with more fluoride than standard, prescribed for higher-risk patients.
- Hyperspectral imaging
- Imaging that captures light across many wavelengths, used in some newer intraoral scanners to support detection of conditions such as caries.
- ICDAS
- The International Caries Detection and Assessment System, a visual scoring system for caries from first visible change to extensive cavitation.
- Image receptor
- The sensor, phosphor plate or film that captures an X-ray image.
- Informed consent
- A patient's agreement to treatment given after they understand what is proposed, the alternatives, including no treatment, and the risks and benefits of each.
- Inhalation sedation
- Sedation with a nitrous oxide and oxygen mix.
- Interdental cleaning
- Cleaning between teeth with brushes or floss.
- Intravenous sedation
- Sedation given through a vein, often with midazolam.
- IR(ME)R
- The Ionising Radiation (Medical Exposure) Regulations, which protect patients from X-ray risk in Great Britain.
- IRR17
- The Ionising Radiations Regulations 2017, which protect staff and the public.
- Irrigation (endodontic)
- Flushing root canals with solutions to disinfect them.
- Justification (radiography)
- The principle that every X-ray or CBCT exposure must be expected to give a benefit that outweighs the risk, after a history and clinical examination.
- Lateral cephalogram
- A side-view skull X-ray used in orthodontics.
- Leukoplakia
- A white patch in the mouth that cannot be wiped off and cannot be attributed to another condition. Some leukoplakias become cancerous.
- Lichen planus (oral)
- A chronic inflammatory condition that can cause white lacy patches or sore areas in the mouth.
- Local anaesthetic
- A drug that numbs an area for treatment.
- Local rules
- Written rules for safe X-ray use in a particular practice.
- Loupes
- Magnifying glasses worn by clinicians.
- Marginal breakdown
- Deterioration of the edge where a filling or crown meets the tooth, which can allow decay to start.
- Medical history
- A record of a patient's health, medicines and allergies, updated before treatment.
- Medical physics expert
- An expert who advises on patient dose and equipment under IR(ME)R.
- Mobility
- Movement of a tooth in its socket beyond normal limits, graded by severity.
- Near-infrared imaging (NIRI)
- Imaging that uses near-infrared light, built into some intraoral scanners, to help show interproximal caries without radiation.
- Non-carious cervical lesion (NCCL)
- Loss of tooth structure at the neck of a tooth, near the gumline, that is not caused by decay. It usually comes from a mix of abrasion, erosion and possibly tooth flexing.
- Occlusal analysis (digital)
- Assessing contacts between upper and lower teeth using digital records, such as scans with bite registration or digital bite-force tools.
- Occlusal radiograph
- An intraoral X-ray taken with the film between the teeth.
- Occlusal wear facet
- A flat, shiny area on a biting surface where teeth have repeatedly rubbed against each other.
- Occlusion
- How the upper and lower teeth come together, at rest and during movement.
- Optimisation (ALARP)
- Keeping radiation doses as low as reasonably practicable once an exposure is justified, by choosing suitable equipment, settings and technique.
- Oral cancer
- Cancer of the mouth, including the tongue, floor of mouth, cheeks, gums and lips.
- Oral hygiene instruction
- Personalised advice on brushing and cleaning between teeth.
- Oral ulcer
- A break in the lining of the mouth.
- Panoramic radiograph (OPG)
- A single X-ray image showing both jaws, the teeth and surrounding structures in one view, also called an OPG or DPT.
- Papilla
- The gum tissue that fills the space between teeth.
- Periapical lesion
- A change at the tip of a tooth's root, often seen on a radiograph, usually from pulp infection.
- Periapical radiograph
- An intraoral X-ray showing a whole tooth, including the root tip.
- Periodontal charting
- Recording pocket depths, bleeding, recession and mobility around each tooth to assess gum health.
- Periodontal grading
- Part of the 2017 classification describing the rate of periodontitis progression from Grade A to Grade C.
- Periodontal staging
- Part of the 2017 classification describing the severity of periodontitis from Stage I to Stage IV.
- Periodontitis
- A chronic inflammatory disease of the tissues supporting the teeth that leads to loss of attachment and bone.
- Phased treatment plan
- A plan that spreads care over stages, often starting with the most urgent needs and moving to longer-term work.
- Phosphor plate
- A reusable digital X-ray receptor scanned after exposure.
- Plaque score
- A measure of how much plaque is on teeth.
- Probing depth
- The distance from the gum margin to the base of the pocket, measured with a periodontal probe.
- Pulpitis
- Inflammation of the dental pulp, described as reversible or irreversible.
- Radiation protection adviser
- An expert who advises practices on radiation safety.
- Radiation protection supervisor
- A person in the practice who helps make sure radiation rules are followed.
- Radiograph grading
- Rating radiograph quality, often as diagnostically acceptable or not.
- Recall interval
- The time between routine check-ups, set for each patient according to their risk of dental disease.
- Rectangular collimation
- Shaping the X-ray beam to a rectangle the size of the receptor.
- Resin infiltration
- A micro-invasive treatment that fills the pores of early enamel lesions with a low-viscosity resin.
- Retreatment
- Redoing a root canal treatment that has failed.
- Risk assessment
- A structured judgement of how likely a patient is to develop decay, gum disease, wear or other problems, used to tailor care and recall.
- Risk assessment (caries)
- An estimate of a patient's chance of developing new caries, based on history, diet, fluoride and clinical findings.
- Root canal treatment
- Removing infected or inflamed pulp, cleaning and filling the root canals.
- Root caries
- Caries on exposed root surfaces, more common in older adults with gum recession.
- Root resorption
- Loss of root structure caused by the body's own cells. It can start on the outside or the inside of the root and may follow trauma, orthodontic tooth movement or pressure from a neighbouring tooth.
- Root surface debridement
- Cleaning root surfaces below the gum to treat periodontitis.
- Rotary files
- Engine-driven instruments used to shape root canals.
- Routine check-up scan
- An intraoral scan taken as part of the periodic examination, alongside the conventional clinical examination.
- Scale and polish
- Removing plaque, calculus and stains from teeth.
- Scan comparison
- Overlaying two scans of the same patient taken at different times to see what has changed.
- Scan overlay
- Placing a new intraoral scan over an earlier scan of the same patient so that differences between visits can be seen.
- Secondary caries
- Tooth decay that develops at the edge of an existing filling or crown.
- Sensibility testing
- Tests such as cold or electric pulp testing that show whether a tooth's nerve responds.
- Silver diamine fluoride
- A liquid applied to carious lesions to help arrest them, which stains the lesion dark.
- Smoking cessation advice
- Brief advice and support to help patients stop smoking.
- Structured review
- A planned follow-up appointment for a patient who has declined or deferred recommended treatment.
- Superimposition
- Aligning two three-dimensional scans precisely on top of each other, usually using stable reference areas, so differences can be measured.
- Supportive periodontal therapy
- Ongoing maintenance after active periodontal treatment.
- Suspected cancer pathway referral
- An urgent referral, in England usually for an appointment within two weeks, for a patient with signs that could indicate cancer.
- Tooth sensitivity test
- Testing response to cold, air or biting to find the source of pain.
- Tooth wear
- Loss of tooth structure from causes other than decay or trauma, such as attrition, erosion and abrasion.
- Tooth wear grading
- A way of recording how much tooth surface has been lost, usually on a simple numbered scale for each part of the mouth, so wear can be compared between visits.
- Tooth whitening
- Lightening teeth with peroxide-based products.
- Traffic-light assessment
- A simple way of grading scan findings as stable, to discuss, or at risk.
- Transillumination
- Shining light through a tooth to show changes such as caries or cracks as shadows.
- Treatment planning
- Working out, with the patient, which care is needed, in what order, and what the alternatives are.
- Voxel
- The smallest three-dimensional unit of a CBCT image, like a pixel with depth. Smaller voxels show finer detail but can mean more dose.
- White spot lesion
- An opaque, chalky white patch of enamel where minerals have been lost in the earliest stage of decay, often near the gumline or around orthodontic brackets.
- Xerostomia
- The feeling of a dry mouth, often linked to reduced saliva.
Scanning and imaging
- Arch scan
- A scan of a whole upper or lower dental arch.
- Autoclavable scan tip
- A scanner tip that can be sterilised in an autoclave between patients.
- Bite registration
- A record of how the upper and lower teeth meet. In a digital workflow it is captured by scanning the teeth together from the side.
- Bite scan
- A buccal scan taken with the teeth together so the software can align the upper and lower arches.
- Buccal bite
- The side view captured during a bite scan to align the arches.
- Case prescription (digital)
- The instructions sent with a scan, describing what the lab should make and how.
- Closed system
- A scanner or software platform that works mainly within one manufacturer's own ecosystem of services and software.
- Cloud-based case management
- Storing and sharing scans and case information through an online service.
- Cloud-native scanner
- A scanner that processes and stores scans in the manufacturer's cloud platform and can run from a web browser on any connected device.
- Colour scan
- An intraoral scan that records true colour as well as shape.
- Cone beam CT (CBCT)
- A three-dimensional X-ray imaging method that shows bone, roots and anatomical structures in the jaws.
- Digital radiograph
- An X-ray image captured with a digital sensor or phosphor plate instead of film.
- Edentulous arch
- A jaw with no natural teeth.
- Edentulous scanning
- Scanning a mouth with no teeth, for dentures or implant planning.
- Face scan
- A three-dimensional capture of the patient's face, used to relate tooth position to facial features.
- Full-arch scan
- An intraoral scan that captures every tooth in an upper or lower arch, rather than a single tooth or quadrant.
- Image capture rate
- How quickly a scanner records images as the wand moves, which affects how fast and smoothly a scan can be taken.
- Instructions for use (IFU)
- The manufacturer's document setting out how a device or material must be used, cleaned, sterilised and maintained.
- Intraoral camera
- A small camera used to capture still images or video inside the mouth.
- Intraoral photogrammetry (IPG)
- Measuring implant positions across an arch from multiple images of coded scan bodies, built into some intraoral scanners.
- Intraoral scan
- The digital three-dimensional model of the teeth, gums and bite produced by an intraoral scanner, usually saved as a mesh file.
- Intraoral scanner
- A handheld device that captures a three-dimensional digital model of the teeth and gums by projecting light and recording its reflection as the wand moves around the mouth.
- Lab portal
- The online connection from a scanner's software to a dental laboratory for sending cases.
- Margin line
- The edge of a tooth preparation where the restoration will end.
- Model-free workflow
- A laboratory process that makes restorations without a physical model, using the scan alone.
- Near-infrared imaging
- An imaging mode on some intraoral scanners that uses near-infrared light to show internal tooth structure, which can help in detecting interproximal caries.
- OBJ file
- A three-dimensional file format that can store surface shape with texture and colour information in a separate file.
- Open file export
- The ability to export scans in standard formats such as STL, PLY or OBJ for use in other software or by any laboratory.
- Open system
- A scanner or software platform that exports files in standard formats so they can be used with any compatible laboratory or software.
- PLY file
- A three-dimensional file format that can store colour and other information alongside the surface shape.
- Post-op scan
- A scan taken after treatment to record the result.
- Powder-free scanning
- Intraoral scanning that does not require coating the teeth with a reflective powder, as early systems did.
- Pre-op scan
- A scan taken before treatment to record the starting position.
- Precision
- How closely repeated scans of the same object match one another. With trueness, it makes up accuracy.
- Quadrant scan
- An intraoral scan of one quarter of the mouth, typically used for a single restoration or a small group of teeth.
- Rescan
- Re-capturing an area of a scan to fill gaps or replace distorted data.
- Retraction
- Moving the gum away from a tooth, with cord or other methods, so the edge of a preparation can be captured.
- Retraction cord
- A thin cord placed in the gum crevice to move tissue away from a margin before scanning or impressions.
- Scan accuracy
- How closely a digital scan matches the real teeth, made up of trueness and precision.
- Scan artefact
- Unwanted or false data in a scan, caused by moisture, reflections or movement.
- Scan body
- A precisely made component attached to an implant so that a scanner can record the implant's position and angle.
- Scan data retention
- How long scans are kept and where, under a practice's records policy.
- Scan protocol
- A set, repeatable sequence for scanning, including the path, surfaces and bite record.
- Scan review
- A check of a scan's quality, by the clinician or the lab, before production begins.
- Scan strategy
- The order and path the scanner wand follows around the arch, as recommended by the manufacturer or developed by the operator.
- Scan time
- How long it takes to capture an intraoral scan, usually a few minutes for a full arch with practice.
- Scan tip
- The end of the scanner wand that goes into the mouth; often removable for cleaning or sterilisation.
- Scan trimming
- Removing unwanted areas such as cheek, tongue or saliva artefacts from a scan.
- Scan-to-lab workflow
- Sending a digital impression and prescription directly from the scanner software to a laboratory.
- Scanner calibration
- Checking and adjusting a scanner against a known reference so it measures correctly.
- Shade matching (digital)
- Using a scanner or digital device to measure tooth colour and suggest a shade for restorations.
- Single-use scan tip
- A disposable scanner tip used for one patient then discarded.
- Soft-tissue scanning
- Capturing gums, palate and other soft tissues in an intraoral scan.
- Stitching
- The software process that joins the many individual images captured during a scan into one continuous three-dimensional model.
- STL file
- A widely used file format that stores a three-dimensional surface as a mesh of triangles, without colour.
- Trueness
- How closely a scan matches the real shape of the object scanned. It is one of the two components of accuracy.
- Wireless scanner
- An intraoral scanner that connects to its computer or cloud without a cable, running on batteries.
Design and restorations
- Additive dentistry
- Restoring teeth by adding material, such as bonded composite or thin ceramic, rather than cutting tooth away for a crown.
- Additive restoration
- Restoring wear by adding material rather than cutting teeth down.
- Adhesive cementation
- Bonding a restoration to the tooth with resin systems.
- Amalgam
- A metal filling material made from mercury alloyed with other metals.
- Anatomic contour
- The natural shape of a tooth that a restoration copies.
- Anterior guidance
- How the front teeth guide the jaw in sideways and forward movements.
- Articulating paper
- Thin coloured paper or film that the patient bites on to mark where the teeth touch, used to check and adjust the bite.
- Biocopy
- Copying the shape of a tooth from a pre-operative scan or wax-up into a new restoration.
- Bleaching tray
- A custom tray that holds whitening gel against the teeth.
- Bonding
- Attaching a restoration or filling material to the tooth with adhesive, so the tooth and restoration act together.
- Bonding agent
- A resin that helps restorative materials stick to enamel and dentine.
- Bridge
- A fixed restoration that replaces a missing tooth by attaching to the neighbouring teeth.
- Bruxism appliance
- A splint worn to protect teeth from grinding.
- Bulk-fill composite
- A composite that can be placed in thicker layers than conventional composite.
- CAD software
- Software used to design restorations from scans.
- CAD/CAM
- Computer-aided design and computer-aided manufacturing: designing a restoration on screen and producing it by milling or printing.
- CAM software
- Software that turns a design into instructions for a mill or printer.
- Canine guidance
- When the canines guide side movements and the back teeth separate.
- Cantilever bridge
- A bridge supported by a tooth on one side only.
- Cement space
- The small gap designed between a restoration and the tooth for cement.
- Centric relation
- A reproducible jaw position used as a reference for planning.
- Chairside CAD/CAM
- Designing and making restorations in the practice, usually during the same appointment, rather than sending them to a laboratory.
- Chairside milling
- Making restorations in the practice by cutting them from a block of material with a milling machine.
- Cobalt-chrome denture
- A partial denture with a cast metal framework.
- Complete denture
- A removable appliance replacing all the teeth in one jaw.
- Composite bonding
- Adding composite to change tooth shape or close gaps.
- Composite resin
- A tooth-coloured filling material made of plastic resin and fine glass or ceramic particles, bonded to the tooth.
- Composite restoration
- A tooth-coloured filling made from resin and filler particles, bonded to the tooth.
- Contact point
- Where two neighbouring teeth touch.
- Conventional bridge
- A bridge supported by crowns on the teeth either side of a gap.
- Conventional cementation
- Fixing a restoration with cements that rely mainly on mechanical retention.
- Conventional impression
- A physical mould of the teeth taken with impression material in a tray.
- Crown
- A restoration that covers the whole visible part of a tooth.
- Crown preparation
- Shaping a tooth so it can receive a crown.
- Custom-made device
- A medical device made to a written prescription for a named patient, such as a crown, denture or aligner.
- Dahl concept
- Placing restorations that open the bite locally, allowing teeth to re-establish contact over time.
- Deep margin elevation
- Placing a layer of composite in the deepest part of a cavity to raise a margin that sits below the gum up to a level that can be isolated, scanned and bonded.
- Die spacer (digital)
- The design setting that creates cement space in a CAD restoration.
- Digital impression
- An intraoral scan used in place of a conventional impression material to record teeth for a restoration or appliance.
- Digital laboratory workflow
- Sending intraoral scans to a dental laboratory electronically, where restorations are designed and made from the digital files.
- Digital smile design
- Planning changes to the appearance of the teeth using photographs, scans and design software, often with a preview for the patient.
- Direct restoration
- A restoration built in the mouth in one visit, such as a composite filling.
- Endocrown
- A one-piece bonded restoration for a root-filled back tooth that extends into the pulp chamber for retention, instead of a separate post, core and crown.
- Etching
- Treating enamel or dentine with acid to prepare it for bonding.
- Exocad
- A widely used dental design software, owned by Align Technology.
- Facial midline
- An imaginary vertical line through the centre of the face.
- Feldspathic porcelain
- A traditional, highly aesthetic ceramic used for veneers and layering.
- Ferrule
- A band of sound tooth around the base of a crown preparation.
- Full-mouth rehabilitation
- Restoring most or all of the teeth together, usually to treat severe wear, damage or bite problems.
- Glass ceramic
- A ceramic containing a glassy phase, valued for translucency, often bonded to tooth.
- Glass ionomer cement
- A tooth-coloured material that bonds chemically to tooth and releases fluoride.
- Glaze firing
- Firing a ceramic restoration with a glaze to seal and smooth its surface.
- Hybrid ceramic
- A material combining ceramic and resin, intended to be easier to mill and kinder to opposing teeth than some ceramics.
- Hybrid ceramic block
- A milling block combining ceramic and resin.
- Immediate dentine sealing
- Applying a bonding agent to freshly cut dentine straight after preparation, before the scan or impression, rather than waiting until the fit appointment.
- Indirect restoration
- A restoration made outside the mouth, such as a crown, inlay or onlay, then fitted.
- Inlay
- An indirect restoration that sits within the tooth without covering the cusps.
- Intercuspal position
- The position where the teeth fit together most fully.
- Lab prescription
- The written instructions sent to the dental laboratory with a scan, describing the restoration, material, shade and design wishes.
- Layered restoration
- A restoration with a core material covered by layers of porcelain for appearance.
- Lithium disilicate
- A glass-ceramic material widely used for crowns, onlays and veneers, valued for strength and appearance.
- Margin
- The edge of a prepared tooth where the restoration will meet it.
- Milling
- Making a restoration by cutting it from a solid block of material with a computer-controlled machine.
- Milling bur
- A cutting tool that shapes restorations in a milling machine.
- Milling machine (chairside)
- A small mill in the practice for making restorations the same day.
- Minimally invasive dentistry
- An approach that keeps as much natural tooth as possible by preventing, monitoring and choosing the smallest effective treatment.
- Minimally invasive restoration
- A restoration that removes as little healthy tooth as possible.
- Mock-up
- A temporary trial of a planned change to tooth shape, made in the mouth so the patient can see and feel it.
- Monolithic restoration
- A restoration made from a single block of material without a layered porcelain overlay.
- Mouthguard
- A protective appliance worn during sport.
- Nesting
- Arranging several designs in one milling block or print job.
- Occlusal adjustment
- Selectively reshaping teeth or restorations to improve the bite.
- Occlusal clearance
- The space between a preparation and the opposing teeth for the restorative material.
- Onlay
- An indirect restoration that covers one or more cusps of a back tooth, preserving more tooth than a full crown.
- Open system (CAD)
- Software or hardware that works with files from other makers.
- Overlay
- A restoration that covers the whole biting surface of a back tooth while keeping the side walls of the tooth.
- Partial coverage restoration
- A restoration such as an onlay or overlay that covers only part of a tooth instead of the whole crown.
- Partial denture
- A removable appliance that replaces some missing teeth.
- PMMA
- Polymethyl methacrylate, a resin used for temporary crowns and dentures, often milled.
- Post and core
- A post placed in a root-treated tooth to support a core for a crown.
- Preparation design
- The shape a tooth is cut to before a restoration, including reduction, margin type and taper.
- Provisional restoration
- A temporary crown, bridge or veneer worn while the final one is made.
- Quadrant dentistry
- Planning and completing restorative treatment for a whole quarter of the mouth in one course of care, rather than tooth by tooth.
- Reline
- Adding new material to the fitting surface of a denture to improve fit.
- Remake
- A restoration that has to be made again because it did not fit, match or work as intended.
- Resin-bonded bridge
- A bridge with a wing bonded to the back of a neighbouring tooth, needing little preparation.
- Rubber dam
- A thin sheet that isolates teeth from saliva during treatment.
- Same-day restoration
- A restoration designed, made and fitted in a single appointment.
- Shade
- The colour of a tooth or restoration, described using a shade guide or digital measurement.
- Shimstock foil
- Very thin metal foil, about 8 to 12 micrometres thick, pulled between the teeth while the patient bites, to check whether particular teeth are holding contact.
- Sintering
- Heating a milled zirconia restoration in a furnace so it shrinks to full density and strength.
- Smile design software
- Software that plans tooth shape and position using photos and scans.
- Smile line
- How much tooth and gum show when a person smiles.
- Snoring appliance
- A mandibular advancement device worn at night to reduce snoring.
- Statement of manufacture
- A document provided with a custom-made dental device in the UK confirming it was made for a named patient to the prescriber's specification.
- STL export
- Saving a 3D design or scan as an STL file for use in another system.
- Tooth library
- A set of tooth shapes in design software used as starting points for restorations.
- Tooth wear index
- A scoring system for measuring tooth surface loss.
- Translucent zirconia
- A form of zirconia made more see-through for better aesthetics.
- Veneer
- A thin restoration bonded to the front surface of a tooth to change its shape or colour.
- Veneer preparation
- Shaping the front of a tooth to receive a veneer.
- Vertical dimension of occlusion
- The height of the face with the teeth together.
- Wax-up (digital)
- A planned tooth shape designed in software before treatment.
- Zirconia
- A strong ceramic material used for crowns, bridges and implant restorations.
- Zirconia block
- A pre-sintered zirconia block used for milling.
3D printing
- 3D printing (dental)
- Building dental objects layer by layer from digital designs, using resin or other materials.
- Additive manufacturing
- The technical term for 3D printing: making objects by adding material layer by layer, rather than cutting it away.
- Biocompatibility
- Whether a material is safe to use in contact with the body for its intended purpose and time.
- Biocompatible resin
- A resin tested for safe contact with the body for its intended use.
- Build plate
- The platform a 3D print attaches to as it grows.
- Build platform
- The surface in a 3D printer on which objects are built.
- Ceramic-filled resin
- A resin material containing ceramic particles to improve strength and wear behaviour.
- Denture base resin
- Resin used to print the pink base of a denture.
- Digital light processing
- A resin printing method that uses a projector to cure a whole layer at once.
- Digital light processing (DLP)
- A 3D printing method that cures each resin layer at once using a projected image of light.
- Exposure time
- How long each resin layer is exposed to light during printing.
- FEP film
- The clear film at the base of many resin vats that lets light through.
- Isopropyl alcohol wash
- Washing printed parts in alcohol to remove uncured resin.
- LCD printing
- A resin printing method, also called masked SLA, that uses an LCD screen to mask light and cure each layer.
- LCD printing (masked SLA)
- 3D printing that cures each layer of resin at once using light shone through an LCD screen.
- Masked stereolithography
- Printing with an LCD screen masking light to cure each layer.
- Model resin
- Resin designed for printing dental models.
- Occlusal splint
- A removable appliance worn over the teeth, often at night, to protect them from grinding or to manage jaw symptoms.
- Permanent printing resin
- A printable material, usually ceramic-filled, intended for definitive restorations such as crowns, inlays, onlays and veneers within its stated indications.
- Post-curing
- Further curing of a printed object with light and sometimes heat after printing, to reach the material's final properties.
- Post-processing
- All the steps after printing: washing, removing supports, curing, finishing and polishing.
- Print failure
- A print that detaches, warps or does not form correctly.
- Print layer height
- The thickness of each layer a 3D printer builds, set before printing.
- Print orientation
- The angle at which a part is positioned on the build platform of a 3D printer.
- Print resin
- The liquid material a dental 3D printer hardens layer by layer to make models, guides, splints or restorations.
- Print validation
- Checking that a printer, resin and settings together produce accurate, safe results.
- Printed aligner model
- A model printed for each stage of in-house aligner treatment.
- Printed denture
- A denture whose base and teeth are designed digitally and made by 3D printing.
- Printed model
- A physical model of the teeth printed from an intraoral scan.
- Printed night guard
- An occlusal guard made by 3D printing from a scan.
- Printed provisional
- A temporary crown or bridge made by 3D printing.
- Printer maintenance log
- A record of cleaning, calibration and parts replaced.
- Printer resolution
- The smallest detail a printer can reproduce, in the build plane and in height.
- Resin shelf life
- How long a resin stays usable before it degrades.
- Resin vat
- The tank that holds liquid resin in a vat photopolymerisation printer.
- Splint resin
- Resin designed for printed occlusal splints and night guards.
- Stereolithography
- A resin printing method using a laser to trace each layer.
- Stereolithography (SLA)
- A 3D printing method that cures liquid resin with a laser, layer by layer.
- Subtractive manufacturing
- Making an object by cutting material away from a solid block, as in milling.
- Support structures
- Temporary scaffolding printed with an object to hold it in place during printing, removed afterwards.
- Surgical guide
- A printed template that directs drilling during implant placement according to a digital plan.
- Surgical guide resin
- Resin used to print implant surgical guides.
- Temporary restoration
- A provisional crown or bridge worn while the definitive restoration is made, or to test a design.
- UV curing unit
- A light box that completes curing of printed parts.
- Validated resin-printer combination
- A resin and printer pairing tested together for a stated use.
- Validated workflow
- A combination of printer, resin, settings and post-processing that the manufacturer has tested for a stated indication.
- Vat photopolymerisation
- The family of 3D printing methods that cure liquid resin with light, layer by layer, including SLA, DLP and LCD printing.
- Washing (3D printing)
- Cleaning uncured resin off a freshly printed part, usually in alcohol, before curing.
- Washing (printing)
- Cleaning uncured resin from a printed part, usually in alcohol, before post-curing.
Implants
- Abutment screw
- The screw that holds an abutment to an implant.
- All-on-four style treatment
- A full-arch fixed bridge supported by a small number of implants, often four.
- Antibiotic prophylaxis
- Giving antibiotics before a procedure to prevent infection.
- Barrier membrane
- A membrane used to keep soft tissue out of a healing bone graft.
- Bone graft material
- Material used to replace or build bone, from the patient, a donor, an animal or synthetic sources.
- Bone grafting
- Adding bone or bone substitute to rebuild an area before or during implant placement.
- Bone level implant
- An implant designed to sit at the level of the jawbone.
- Bone volume
- The height and width of bone available where an implant is to be placed.
- Cement-retained crown
- An implant crown cemented onto an abutment.
- Cement-retained implant crown
- An implant crown fixed to its abutment with cement.
- Connective tissue graft
- Soft tissue taken from the palate to thicken or cover gum.
- Custom abutment
- An abutment designed for one patient's implant position and soft tissue, usually by CAD/CAM.
- Delayed loading
- Waiting for healing before loading an implant.
- Dental implant
- A titanium or ceramic fixture placed in the jawbone to support a replacement tooth or teeth.
- Dry socket
- A painful condition after extraction when the blood clot is lost.
- Emergence profile
- The shape of a restoration or abutment as it rises from the implant through the gum.
- Extraction
- Removing a tooth.
- Guided bone regeneration
- Using a membrane and graft material to grow bone where it is lacking.
- Guided implant surgery
- Placing implants using a surgical guide made from a digital plan that combines CBCT and intraoral scans.
- Healing abutment
- A temporary cap fitted to an implant to shape the gum while it heals.
- Healing cap
- A small cover screwed onto an implant during healing.
- Immediate implant
- An implant placed at the same appointment as the tooth extraction.
- Immediate loading
- Attaching a restoration to an implant soon after it is placed.
- Implant abutment
- The connecting part between an implant and the crown or bridge it supports.
- Implant crown (printed)
- A crown for an implant made by 3D printing from a digital design, within the stated indications of the material and system.
- Implant failure
- Loss of an implant or its inability to support a restoration.
- Implant maintenance
- Regular review and cleaning of implants and their restorations.
- Implant passport
- A record of an implant's system, size and components given to the patient.
- Implant planning report
- A summary of the digital plan, including implant positions, sizes and the guide design.
- Implant planning software
- Software that combines a CBCT scan and an intraoral scan so the implant position can be planned around the final tooth.
- Implant stability
- How firmly an implant is held in the bone, at placement and after healing.
- Implant stability quotient (ISQ)
- A number from 1 to 100, measured by resonance frequency analysis, that indicates how firmly an implant is held in the bone.
- Inferior alveolar nerve
- The nerve in the lower jaw that supplies the lower teeth and lip feeling.
- Internal connection
- An implant design where the abutment fits inside the implant.
- Keratinised tissue
- Firm gum tissue around teeth and implants.
- Maxillary sinus
- An air space above the upper back teeth.
- Mental foramen
- An opening in the lower jaw where the mental nerve exits.
- Multi-unit abutment
- An abutment used to bring several implants to a common level for a bridge.
- Osseointegration
- The direct structural connection between living bone and the surface of an implant.
- Overdenture
- A removable denture held in place by implants or retained roots.
- Peri-implant mucositis
- Inflammation of the soft tissue around an implant without bone loss.
- Peri-implantitis
- Inflammation around an implant that leads to loss of the supporting bone.
- Primary stability
- The mechanical stability of an implant at placement.
- Prosthetically driven planning
- Planning an implant's position from the design of the final tooth first, then fitting the implant to it.
- Restoratively driven planning
- Planning implant position from the planned final restoration backwards, rather than from where bone happens to be.
- Ridge augmentation
- Building up the jawbone ridge where it is too narrow or short.
- Screw access channel
- The opening through a screw-retained restoration for the retaining screw.
- Screw-retained crown
- An implant crown fixed to the implant with a screw, so it can be removed later.
- Sinus lift
- Raising the floor of the maxillary sinus and grafting bone to allow an implant.
- Socket preservation
- Grafting a tooth socket after extraction to limit bone loss.
- Surgical extraction
- Removing a tooth that needs a flap or bone removal.
- Third molar
- The wisdom tooth, the last tooth in each quarter of the mouth.
- Ti-base
- A titanium base bonded to a ceramic or resin crown or abutment to connect it to an implant.
- Tissue level implant
- An implant with a collar designed to sit at the level of the gum.
- Torque
- The tightening force applied to an implant screw, set by the manufacturer.
- Verification jig
- A rigid splint, often printed, used to check that recorded implant positions are accurate before a multi-unit prosthesis is made.
Aligners and tooth movement
- Aligner attachment template
- A tray used to bond attachments to teeth in the planned shapes.
- Aligner simulation
- A software preview of how teeth could move with aligner treatment, created from an intraoral scan.
- Aligner wear time
- How many hours a day aligners are worn, usually around 20 to 22 hours.
- Attachment
- A small tooth-coloured bump bonded to a tooth so an aligner can grip it and move it in a planned direction.
- Attachments
- Small tooth-coloured shapes bonded to teeth to help aligners grip and move them.
- Class II malocclusion
- A bite in which the lower teeth sit further back relative to the upper teeth.
- Class III malocclusion
- A bite in which the lower teeth sit further forward relative to the upper teeth.
- Clear aligner therapy
- Moving teeth with a series of removable clear plastic trays.
- Clear aligners
- A series of removable transparent trays that move teeth gradually, each worn for a set period.
- ClinCheck
- Align Technology's software for planning and reviewing Invisalign treatment before aligners are made.
- Crossbite
- When an upper tooth bites inside the lower tooth instead of outside it.
- Crowding
- Insufficient space for the teeth to align, so they overlap or twist.
- Deep bite
- When the upper front teeth overlap the lower front teeth too much.
- Elastics (orthodontic)
- Rubber bands used to apply forces between upper and lower teeth.
- Fixed retainer
- A wire bonded behind the front teeth to keep them in place after treatment.
- Index of Orthodontic Treatment Need
- A UK scale that grades the need for orthodontic treatment.
- Interproximal enamel reduction
- Removing small amounts of enamel between teeth to create space.
- Interproximal reduction (IPR)
- Removing a small amount of enamel between teeth to create space during orthodontic treatment.
- Malocclusion
- Teeth or jaws that do not meet in the ideal position, including crowding, spacing, overbite and crossbite.
- Midcourse correction
- Re-planning partway through aligner treatment when teeth are not following the plan.
- Open bite
- When the front teeth do not overlap vertically with the back teeth together.
- Orthodontic records
- The photos, scans and radiographs taken before treatment.
- Orthodontic referral
- Sending a patient to a specialist for assessment or treatment.
- Overbite
- How far the upper front teeth overlap the lower front teeth vertically.
- Overjet
- The horizontal distance between the upper and lower front teeth.
- Pre-restorative alignment
- Moving teeth before restorative work to allow less invasive treatment.
- Pre-restorative orthodontics
- Moving teeth before restorative treatment so restorations can be smaller, more conservative or unnecessary.
- Refinement
- An additional set of aligners made partway through or at the end of treatment to fine-tune tooth positions.
- Relapse
- Teeth moving back towards their original positions after orthodontic treatment.
- Relapse (orthodontic)
- Teeth moving back after treatment.
- Removable retainer
- A clear or wire retainer worn to hold teeth after treatment.
- Restorative-led orthodontics
- Moving teeth to create better positions or space before restorations are placed.
- Retainer
- An appliance, fixed or removable, that holds teeth in position after orthodontic treatment.
- Retention
- Keeping teeth in their new positions after orthodontic treatment, using retainers.
- Retention protocol
- The plan for retainers after orthodontic treatment.
- Space analysis
- Measuring the space available for teeth against the space they need.
- Spacing
- Gaps between teeth.
- Tooth movement simulation
- Software showing predicted tooth movements.
- Tracking
- How closely teeth follow the planned movement with each aligner.
- Treatment plan simulation
- A digital preview of planned tooth movements.
- Treatment simulation
- A digital preview of how teeth might move during aligner treatment, made from the patient's scan.
Practice and adoption
- ADA CERP
- The American Dental Association's Continuing Education Recognition Program, which recognises providers of continuing dental education.
- AGD PACE
- The Academy of General Dentistry's Program Approval for Continuing Education, which approves CE providers.
- Algorithm bias
- When software performs differently for some groups or image types.
- Artificial intelligence (dental)
- Software that learns from data to help detect findings or automate tasks.
- Behaviour change (clinical)
- Changing what clinicians and teams actually do in appointments, rather than only what they know.
- Case acceptance
- The share of proposed treatment plans that patients choose to go ahead with.
- CE marking
- The European mark showing a product meets EU requirements.
- Champion (clinical)
- A team member who leads and supports a new process.
- Change management
- Planning and supporting a team through a new way of working.
- Clinical adoption
- The point at which a new tool or method becomes routine in everyday clinical work.
- Clinical audit
- Measuring care against a standard, making changes and re-measuring.
- Clinical champion
- A member of the team who leads a new way of working, supports colleagues and keeps the routine going.
- Clinical governance
- The systems a practice uses to keep care safe and improve quality.
- Complaints procedure
- A practice's written process for receiving, acknowledging, investigating and responding to complaints, with timescales.
- Continuing education (CE)
- Learning that dental professionals complete after qualifying to keep their knowledge and skills up to date, usually required for licence renewal.
- Cybersecurity
- Protecting practice systems and data from attack.
- Data backup
- Keeping copies of records so they can be restored if lost.
- Data protection impact assessment
- A review of risks before starting processing that could affect people's privacy.
- Delegated scanning
- Trained dental nurses or assistants taking intraoral scans under a clinician's prescription, where regulations allow.
- Dental nurse scanning
- Trained dental nurses taking scans on prescription where permitted.
- Development outcomes (GDC)
- The four GDC outcomes (A to D) that each CPD activity should map to: communication, management and teamwork, knowledge and skills, and professional behaviours.
- Digital charting
- Recording dental findings on screen instead of paper.
- Digital consent form
- A consent form completed and signed electronically.
- Digital Level
- A five-step scale describing how a practice uses its scanner: installed, activated, embedded, productive and ready to scale.
- Digital patient record audit
- Checking that digital records meet standards for completeness and accuracy.
- Duty of candour
- The professional duty to be open and honest with patients when something goes wrong.
- Educate, Engage, Empower
- A patient-first approach to using intraoral scans: help the patient see their mouth (Educate), discover change together (Engage, co-discovery), and own the finding and the decision (Empower, co-diagnosis).
- Electronic patient record
- The digital clinical record for a patient.
- Equipment finance
- Spreading the cost of equipment through a loan or lease.
- Group rollout
- Introducing the same digital routine across several practices in a group, with shared measures.
- Habit formation
- How a new behaviour becomes automatic through repetition in a stable context.
- Highly recommended CPD topics
- The GDC's highly recommended topics: medical emergencies, disinfection and decontamination, and radiography and radiation protection.
- Hygienist-led scanning
- Hygienists or therapists taking routine scans within their scope.
- Implementation programme
- Structured training over time, with rehearsal, supervision and practice tasks, designed to make a new routine stick.
- Indemnity
- Cover that protects patients and professionals if a claim is made.
- Information governance
- How a practice manages records and information lawfully and securely.
- Installed base
- All the scanners already owned and installed in practices.
- Key performance indicator (KPI)
- A number tracked regularly to show whether a practice is meeting a goal.
- Learning needs analysis
- Working out what training a person or team needs.
- Machine learning
- A type of AI where software improves by learning from examples.
- MHRA
- The Medicines and Healthcare products Regulatory Agency, the UK regulator for medicines and medical devices.
- Online booking
- Letting patients book appointments online.
- Patient education
- Helping patients understand their oral health and options.
- Patient education (digital)
- Using scans, images and simulations to help patients understand their own oral health.
- Patient journey
- The steps a patient goes through from booking to completed care and follow-up.
- Patient portal
- An online area where patients see plans, forms and messages.
- Peer review
- Professionals reviewing each other's work to share learning.
- Personal development plan (PDP)
- A plan of the CPD a dental professional intends to do, linked to their field of practice and development outcomes.
- Practice key performance indicators
- Regularly tracked measures such as scans taken, plans accepted or failed appointments.
- Practice management software
- Software for appointments, records, charting and billing.
- Prescription (dental)
- A written instruction for a medicine, appliance or lab work.
- Recall scan
- A scan taken at a routine check-up for comparison over time.
- Reflective practice
- Thinking about what happened in your work and what you will do differently.
- Remote monitoring (dental)
- Tracking treatment, such as aligners, through photos or scans sent by the patient.
- Return on investment
- The financial return compared with the cost of an investment.
- Return on investment (scanner)
- The financial return from a scanner compared with its cost, from impressions replaced and treatment accepted.
- Same-store growth
- Growth from a practice's existing patients and capacity, rather than from opening or buying more sites.
- Scanner utilisation
- How much, and for what, a practice's scanner is actually used, often measured as routine scans per clinician per day.
- Scope of practice
- The tasks each dental professional is trained and competent to do, as set by the GDC in the UK.
- Service plan
- A paid agreement covering support, warranty or software for equipment.
- Significant event analysis
- A structured review of an event that could have affected safety, to learn from it.
- Skill mix
- Using the full dental team, including hygienists, therapists and nurses, within their scope.
- Special category data
- Under UK GDPR, types of personal data needing extra protection, including health data such as dental records and scans.
- Standard operating procedure
- A written step-by-step method for a routine task.
- Study club
- A group of clinicians who meet to learn together.
- Team huddle
- A short daily team meeting to plan the day.
- Teledentistry
- Using video, photos or messaging to give dental advice remotely.
- Total cost of ownership
- All costs over the life of equipment, including subscriptions, service and consumables.
- Treatment acceptance
- The share of recommended treatment that patients agree to.
- Treatment coordinator
- A team member who helps patients understand plans, costs and next steps.
- Treatment options discussion
- Explaining the realistic options, including no treatment, with benefits, risks and costs.
- Two-factor authentication
- A login that needs a second check, such as a code on a phone.
- UKCA marking
- The UK mark showing a product meets UK regulations, including many medical devices.
- Utilisation rate
- How often equipment is actually used against what is possible.
- Valid consent
- Consent that is informed, voluntary and given by someone with capacity.
- Verifiable CPD
- In the UK, CPD with documentary evidence (such as a certificate), concise aims and objectives, anticipated development outcomes and quality controls.
- Workflow mapping
- Drawing each step of a process to find delays and gaps.
Get the white paper and the starter guide
Free. Enter your email and both open straight away.
