Digital First Dentistry › Printed crowns on implants

Guide

Printed crowns on implants

Printing can make implant restorations faster and less expensive: provisional crowns to shape the gum, and in some cases definitive single crowns bonded to a titanium base. As with printed crowns on teeth, it works when the material is used within its indications and the process is exact.

Where it can help

  • Provisional crowns to shape the soft tissue after placement.
  • Definitive single crowns on a titanium base, only where the material is indicated for implant use.
  • Try-ins for larger cases, to check fit, appearance and the bite before the final work.

Where to be careful

  • Multi-unit implant bridges and full-arch work: use materials and workflows designed for them.
  • Patients who grind or clench heavily.
  • Long-term evidence for printed definitive implant crowns is still limited. Say so in the consent discussion.

The process

  1. Accurate implant scan with the correct scan body.
  2. Design using the matching titanium-base library.
  3. Print, wash and cure exactly as the manufacturer specifies.
  4. Bond the crown to the titanium base following the bonding protocol.
  5. Tighten to the implant manufacturer's recommended torque and seal the screw access.

Next: scanning for implant planning.

Common questions

Can a printed crown be used on an implant?

Some ceramic-filled printing resins are indicated for single implant crowns bonded to a titanium base. Check the material's stated indications for implant use before you print one.

Screw-retained or cemented?

Many clinicians prefer screw-retained single implant crowns on a titanium base because there is no excess cement and the crown can be removed. Follow the implant and material manufacturers' guidance.

Are printed provisional crowns useful on implants?

Yes. A printed provisional can shape the gum around an implant before the definitive crown, and it is quick and inexpensive to adjust or remake.

Get the white paper, starter guide and checklist

Free. Enter your email and we will email all three to you.

Tell us more (optional)

We use your email to send these resources, and updates only if you tick the box. Never shared unless you ask for introductions. Unsubscribe any time.

Written by Dr Bhavin Bhatt BDS MFGDP RCS (Eng), GDC 76358 with AI drafting assistance · Facts checked 16 November 2026 · Editorial policy · Independence · Report an error