Digital First Dentistry › Printed crowns

Guide

Printed crowns: what works and what doesn't

Chairside printing can let a patient leave with a definitive restoration on the day it is planned, at a lower cost than many laboratory options. It works well when it is used for the right cases and the process is followed exactly. See also the dental 3D printing guide and 3D printed dentures.

Where it works

  • Single-unit crowns, onlays, inlays and veneers, within the material's stated indications.
  • Planned quadrant dentistry, where several units can be designed and printed together.
  • Patients who value fewer visits and a lower fee.

Where to be careful

  • Multi-unit bridges and heavy load: check the material's indications; many printing resins are not intended for them.
  • Long-term evidence: survival data for printed definitive restorations is still building. Tell patients so, and record it in the consent.
  • High aesthetic demand: complex shade matching may still be better from the laboratory.

The process that decides success

  1. Accurate scan with clear margins.
  2. Design within the material's minimum thickness.
  3. Printing on a validated printer and material combination.
  4. Washing and curing exactly as the manufacturer specifies.
  5. Bonding to the manufacturer's protocol.
  6. Review at the next check-up, with a new scan to compare.

Run the numbers for your practice in the chairside printing calculator.

Common questions

Can printed crowns be used as definitive restorations?

Some ceramic-filled printing resins are cleared for definitive single crowns, inlays, onlays and veneers. Use each material only within its manufacturer's stated indications.

What does a printed crown cost to make?

The printing material is typically around £6–10 a unit (UK prices), before the cost of equipment, chair time and the team's time.

What is the most common reason printed restorations fail?

Process errors: poor washing or curing after printing, or not following the bonding protocol. Treat post-processing as clinically important, not as housekeeping.

In the UK, printing in the practice makes you a manufacturer. If you print or mill definitive restorations yourself, you are making a custom-made medical device: the practice must register with the MHRA and give each patient a statement of manufacture, as NHS Business Services Authority guidance sets out for chairside restorations. Compare like with like: printed resin and laboratory ceramic are different materials with different indications and evidence; chairside milling of glass-ceramic or zirconia is another route.

Get the white paper, starter guide and checklist

Free. Enter your email and we will email all three to you.

Tell us more (optional)

We use your email to send these resources, and updates only if you tick the box. Never shared unless you ask for introductions. Unsubscribe any time.

Written by Dr Bhavin Bhatt BDS MFGDP RCS (Eng), GDC 76358 · Reviewed by Dr Bhatt 16 November 2026 · Editorial policy · Independence · Report an error