Digital First Dentistry › Glossary › Digital laboratory workflow

Glossary · Design and restorations

Digital laboratory workflow

A digital laboratory workflow is the route from an intraoral scan in the surgery to a finished restoration from the laboratory, with the impression, the stone model and much of the hand work replaced by files, design software and milling or printing.

The steps

  1. Scan. The dentist scans the preparation, the opposing arch and the bite. For implants, a scan body records the implant position.
  2. Prescribe. The scan is sent with a written prescription: the restoration, material, shade, margin details and anything the technician needs to know. Photographs, especially shade photographs, are part of the prescription.
  3. Design. The technician designs the restoration in CAD software on the scan, checking margins, contacts, occlusion and thickness on screen.
  4. Make. The design is milled from a block or printed, then finished: crystallised, sintered, stained, glazed or polished depending on the material.
  5. Fit. The restoration returns, sometimes with a printed model and sometimes without one.

The files

Scans are usually exchanged as STL files, which record surface shape only, or as PLY or OBJ files, which can also carry colour. Most scanners send through their own portal to the laboratory, and many can also export an open file for any laboratory to use. It is worth confirming with your laboratory which route and format they prefer before the first case.

What changes for the practice

  • Speed. The case reaches the laboratory the moment it is sent, not when the courier collects it.
  • Feedback. The technician can see the scan straight away and flag a margin or a reduction problem while the patient is still in the chair, or at least before the case is made.
  • Fewer remakes from distortion. There is no impression material to tear or stone to expand. Errors still happen, but they come from the scan and the preparation, both of which you can check on screen.
  • A record. Every case has a digital file that can be revisited, compared or remade without recalling the patient.

Model-free or not?

In a model-free workflow the restoration is designed, made and returned without any physical model. That works well for single crowns, onlays and many implant crowns. Larger or more complex cases, such as multiple anterior units, often still benefit from a printed model so the technician can check contacts and emergence in three dimensions.

Where it goes wrong

  • Margins not captured because of blood, saliva or tissue over the finish line. If you cannot see the margin on the scan, the technician cannot either.
  • An incomplete bite scan, leading to high restorations.
  • A thin prescription. A scan without clear instructions and shade information leaves the technician guessing.
  • No agreed process with the laboratory for questions, so a query sits in an inbox while the patient's appointment approaches.

Why the check-up scan matters here too

The same scanner that captures preparations can capture the whole mouth at the routine check-up. That full-arch record gives the laboratory a pre-operative shape to copy, gives the dentist a baseline to compare against later, and shows the patient what the dentist is seeing. In practices that scan routinely, the laboratory workflow stops being a separate step for crowns and becomes part of how the practice runs.

A simple start-up checklist

  1. Agree the file route and format with your laboratory.
  2. Agree a prescription template that includes photographs and shade.
  3. Agree how the laboratory will raise a query and how fast you will answer.
  4. Start with single-unit posterior crowns, then widen the range.
  5. Track remakes and their causes for the first few months.

Related terms

Read more

Get the white paper and the starter guide

Free. Enter your email and both open straight away.

We use your email to send these resources, and updates only if you tick the box. Never shared unless you ask for introductions. Unsubscribe any time.

Written by Dr Bhavin Bhatt BDS MFGDP RCS (Eng), GDC 76358 with AI drafting assistance · Facts checked 14 November 2026 · Editorial policy · Independence · Report an error