Digital First Dentistry › Choosing an intraoral scanner for general practice

Guide

Choosing an intraoral scanner for general practice

Most buying decisions start with accuracy and speed. In everyday practice, the scanner that pays back is the one the team uses at every appropriate check-up. Choose for routine use first, and for the laboratory work it feeds second. For each brand’s current models, see the independent scanner guide. See what an intraoral scanner costs.

Seven questions to ask before you buy

  1. Will the team use it at the check-up? Wand size and weight, tip size for small mouths, and how quickly a full-arch scan can be taken all decide whether scanning becomes routine.
  2. Can you compare scans between visits? Overlaying one visit's scan on the last is what turns a scan into a monitoring record. Check how simple this is in the software.
  3. Are the files open? Make sure you can export standard file types (such as STL, PLY or OBJ) to any laboratory or design software, not just to one partner.
  4. What does it cost to run? Add up software licences, warranty, tips and sleeves, cloud storage and upgrades over five years.
  5. What extra imaging does it offer? Some scanners add colour, shade or other imaging modes. Decide which you will actually use with patients.
  6. How does it connect? Laboratory portals, practice software and chairside design and printing should fit together without manual workarounds.
  7. What training comes with it? Installation training teaches the buttons. Ask what support exists for using the scanner at every check-up.

Why the last question matters most

Owning a scanner is step one of five on the Digital Level scale, which runs from owning a scanner to using it at every check-up. In a University of Manchester study of 97 UK dentists (under peer review), routine scanning rose from 10% to 80% within 12 months with structured training and implementation support. The hardware alone did not do that.

Digital First Dentistry does not recommend one manufacturer over another. Ask each supplier the same seven questions and compare the answers side by side.

Judge scanners on the patient experience

Every major scanner takes accurate impressions. What separates them for digital-first dentistry is whether the patient can see their own mouth, compare it over time and take ownership of it: Educate, Engage, Empower. Read the patient-first scanner scorecard.

Common questions

Which intraoral scanner is best for general practice?

There is no single best scanner. The right one is the one your whole team will use at every appropriate check-up, that exports open files to the laboratories you use, and whose running costs you understand before you buy.

Should I buy a scanner with a subscription?

Many scanners carry annual software or warranty fees. Neither model is wrong, but compare the total cost over five years, not the purchase price alone.

Who in the team can take the scan?

Check what your regulator allows each team member to do (in the UK, the GDC Scope of Practice) and their training. Many practices train nurses to take routine scans so the dentist's time goes on the conversation.

Get the white paper, starter guide and checklist

Free. Enter your email and we will email all three to you.

Tell us more (optional)

We use your email to send these resources, and updates only if you tick the box. Never shared unless you ask for introductions. Unsubscribe any time.

Written by Dr Bhavin Bhatt BDS MFGDP RCS (Eng), GDC 76358 · Reviewed by Dr Bhatt 16 November 2026 · Editorial policy · Independence · Report an error