Digital First Dentistry › Glossary › Custom abutment
Custom abutments
A custom abutment is an implant abutment designed for one patient and one implant site, usually by CAD/CAM, rather than taken off the shelf. It lets the restoring dentist control the emergence profile, the angle and, most importantly, where the crown margin sits in relation to the gum.
Stock or custom?
A stock abutment is a prefabricated part from the implant manufacturer in a set range of heights and angles. It is quick and cheaper, and in a straightforward posterior site with shallow tissue it can work well.
The limitation is shape. A stock abutment has a round, standard profile, while the soft tissue around an implant follows the shape of the tooth it replaced. Where the tissue is deep or uneven, a stock abutment can leave the crown margin well below the gum on one side, and that is where problems start.
A custom abutment is designed from a scan of the implant position and the soft tissue. The technician can follow the tissue contour, correct an angled implant, and place the margin where it can be seen and cleaned.
Why margin position matters: residual cement
With a cement-retained crown, any cement that escapes below the margin is hard to see and hard to remove. Residual excess cement has been linked with peri-implant disease: in a widely cited 2009 study, Wilson found excess cement in 81% of implants with clinical signs of peri-implant disease. The deeper the margin, the harder clean-up becomes.
Laboratory studies comparing CAD/CAM custom abutments with stock abutments have found less residual cement around the custom designs, largely because their margins sit closer to the tissue level. A custom abutment does not remove the risk on its own, though; careful cementation technique still matters.
Options worth knowing
- Material. Titanium is strong and well proven. Zirconia, often bonded to a titanium base, avoids a grey shadow through thin tissue in the front of the mouth.
- Ti-base hybrid abutments. A titanium base from the implant manufacturer with a custom ceramic upper part bonded to it, combining a reliable connection with a custom shape.
- Screw-retained crowns. Where the implant position allows, a screw-retained crown removes the cement question entirely and makes the restoration retrievable.
- Connection. Use genuine or validated components for the implant system. The fit of the connection affects screw loosening and long-term stability.
Where the digital workflow helps
Custom abutments are now mostly designed digitally. A scan body on the implant records its position, an intraoral scan captures the soft tissue and opposing teeth, and the laboratory designs the abutment and crown together on screen. That replaces an implant-level impression and a stone model, and it means the abutment shape can be planned around the margin you want rather than adjusted after the fact.
A full-arch scan taken earlier, at the check-up, adds something else: a record of the tooth and gum shape before the tooth was lost, which helps the technician copy a natural emergence profile.
A simple checklist
- Check the tissue depth around the implant. If the margin would sit more than about a millimetre below the gum on a stock part, consider custom.
- Decide screw-retained or cement-retained before the abutment is designed.
- Choose the material for the site: titanium posteriorly, zirconia on a titanium base where appearance matters.
- Scan with a scan body, including the soft tissue and the opposing arch.
- If cementing, use a technique that limits excess, and check radiographically and clinically for retained cement.
Sources
- Wilson TG Jr. The positive relationship between excess cement and peri-implant disease: a prospective clinical endoscopic study. J Periodontol 2009; 80: 1388–1392.
- Yue ZG, Zhang HD, Yang JW, et al. Comparison of residual cement between CAD/CAM customized abutments and stock abutments via digital measurement in vitro. Beijing Da Xue Xue Bao Yi Xue Ban 2021; 53: 69–75.
Related terms
Read more
Get the white paper and the starter guide
Free. Enter your email and both open straight away.
